United States

Your Local Office is United States

SEKO Dosing Systems Corporation USA

Seko Dosing Systems Corporation
913 William Leigh Drive
Tullytown PA, 19007

Phone: +1 215 945 01 25
Fax: +1 215 945 09 37
Email: sales@sekousa.com


See more global contact details...

Simply Kompact dosing

Overview

Kompact is a simple and reliable range of micro-processor based wall mounted solenoid driven dosing pump. The range has been designed to provide a general solution to the most commonly found daily needs. The range features both constant and proportional flow rates managed through a manually adjustable control dial on the front panel.

Kompact, even in its basic variant, uses premium materials in its manufacture. The pump head comes as standard in PVDF-T, but can be optionally specified in natural PVDF and comes with a ceramic ball valve as standard improving the reliability of the
pump over time and offers chemical compatibility of the wetted parts. SEKO’s diaphragms are made of pure solid PTFE offering a superior life expectancy guaranteed by SEKO for 5 years, making routine replacement no longer necessary.

Some variants come with a Stabilized Multi Power Supply 100 - 240 Vac 50/60 Hz offering reduced energy consumption. The solenoid only draws the required power to activate the pump, based on the working conditions which brings improved pump efficiency as performance is not affected by power supply fluctuations.

Kompact AMC
Constant flow rate that can be manually adjusted or with proportional flow rate according to a digital input signal (from water meter), Power-ON led indicator and level control input. The two different modes are: 

  • Constant (switch in C position) The pump constantly doses the rate selected with the potentiometer.
  • Proportional (switch in P position) The pump doses proportionally to the digital input signal (Division mode 4 : 1). Maximum input frequency: 80Hz.
Kompact AML
Analogue dosing pump with constant flow rate with manual adjustment using the control dial on the front panel with two frequency ranges (0÷20% or 0÷100%), Power-ON led indicator and level control input

Kompact AMM
Constant flow rate that can be manually adjusted or with proportional flow rate according to an external analogue signal (4÷20 mA), Power-ON led indicator and level control input. The two different modes are:

  • Constant (switch in C position) The pump constantly doses the rate selected with the potentiometer.
  • Proportional (switch in P position) The pump doses proportionally to the analogue input signal (4÷20 mA).
Kompact AMS 
Analogue dosing pump with constant flow rate with manual adjustment using the control dial on the front panel. Power-ON led indicator. 
  • The pump head comes as standard in PVDF-T, but can be optionally specified in natural PVDF 
Kompact DPT
Constant flow rate manually adjustable, with proportional flow rate according to an external analog (0/4 - 20 mA or 20 - 4/0 mA) or digital signal (water meter, hall sensor or voltage signal). 
  • Programmable via keypad and features a 2 line x 8 digit backlit display. 
  • The pump head has a manual priming valve. 
  • The flow rate is manually or automatically (by signal input) adjustable from 0 (pump stop) to 100% of the max flow rate 
  • Comes with a low level alarm 
Kompact DRP
Constant flow rate manually adjustable, with proportional flow rate according the measured pH or Redox value. 
  • Programmable via keypad and features a 2 line x 8 digit backlit display. 
  • The pump head has a manual priming valve. 
  • The flow rate is manually or automatically (by signal input) adjustable from 0 (pump stop) to 100% of the max flow rate 
  • Comes with a low level alarm.