Kontrol 800 Cooling Tower Panel
Metering control system Kontrol 800 Panel for Cooling Tower Application, it is a complete panel station with hydraulic part and Electronic controller instrument.
The Kontrol panel 800 is based on user friendly approach, can be selected and its maintenance can be done without technical knowledge.
Kontrol 800 features:
Graphic display and Keypad • Simultaneous value of the measure, Temperature and Relay status. • 4-lines, 20-characters Alphanumeric Display. • Seven control keys for instrument calibration and configuration.
Enclosure Box and Power Supply • Wall mounting PP plastic material IP65 Box • Universal Power Supply 100÷240 Vac 50/60 Hz
Manual controls The user-friendly programming step menu makes starting up and checking the control and dosing system easily
Data logging Internal Flash memory to load record measures values. Type: Circular (F.I.F.O.) or Filling
RS485 Serial port For set-up and real-time data acquisition from remote or for stored data download on PC or laptop (Communication software SekoNet required). MODBUS RTU communication protocol.
Measure Input High measuring resolution with probe quality control for pH and ORP probes.
Digital Input Double channel Voltage Input and Reed level Input to disable all function controller output.
Four (4) Current outputs 4÷20mA Galvanic insulation Four (4) programmable outputs proportional Measures: pH, ORP, Conductivity, Flow rate.
Four (4) Frequency Outputs • 1÷120 Pulses/Minutes open collector Insulation channel. • Four (4) independent frequency outputs proportional to the input signal from the water meter pulse sender.
Six (2) Relay Outputs • Four (4) independent relays with power supply dedicated for: • pH chemical products • Chlorine by redox measure, open solenoid valve • Blow down function • Biweekly function for Algaecide product. • Two (2) relays dry contact for: • Alarm remote • Temperature Set point Measure.
Integrated software functions • Contact Relays: ON/OFF, Timed, Proportional settings • Biweekly timer with six (6) programs • Conductivity measure to convert in Ohm or TDS units • Flow rate measure with permanent and resettable counter